HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 80

2 AUTH-1004 Probable Cause Recommended Action Severity Indicates an authentication configuration value was set to the specified value. The data type is either "authentication type" or "DH group type". No action is required. INFO AUTH-1004 Message , [AUTH-1004], ,, ERROR, , Failed to set type to . Probable Cause Recommended Action Severity Indicates that the authUtil command has failed to set the authentication configuration value. The data type is either "authentication type" or "DH group type". Retry the authUtil command. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1005 Message , [AUTH-1005], ,, ERROR, , Authentication file does not exist: . Probable Cause Recommended Action Severity Indicates an authentication file corruption. Run the firmwareDownload command to reinstall the firmware. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1006 Message , [AUTH-1006], ,, WARNING, , Failed to open authentication configuration file. 2-2 Fabric OS Message Reference Publication Number: 53-1000242-01