HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 503

ZONE System Messages Chapter 73 ZONE-1002 Message , [ZONE-1002], ,, WARNING, , WWN zoneTypeCheck or zoneGroupCheck warning() at port() Probable Cause Recommended Action Severity Indicates that a zone filter or zone group check failure occurred. The frame filter logic reported a failure when creating or adding zone groups during PLOGI trap processing. This messages usually indicates problems when adding CAM entries before the filter setup. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING ZONE-1003 Message , [ZONE-1003], ,, WARNING, , zone() contains (, ) which does not exist. Probable Cause Indicates that the port zone member that is targeted for the local switch contains a non-existent port. The effective zoning configuration (displayed in the error message) contains a port number that is out of range. Recommended Edit the zone database and change the port number to a viable value in the effective configuration. Action Severity WARNING Fabric OS Message Reference Publication Number: 53-1000242-01 73-1