HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 353

MS-1005 44 Recommended Action Severity This message is often transitory. The fabric might be reconfiguring, forming, or merging. Wait a few minutes and try the operation again. Run the fabricShow command or the secFabricShow command to verify that the number of domains matches the Management Server known domains. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. INFO MS-1005 Message , [MS-1005], ,, ERROR, , MS Invalid CT Response from d= Probable Cause Recommended Action Severity Indicates that MS received an invalid common transport (CT) response from switch domain. MS expects either a CT accept IU or a reject IU; MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Check the integrity of the FC switch at the specified domain. It is not sending correct MS information as defined by the FC-FS standard. ERROR MS-1006 Message , [MS-1006], ,, ERROR, , MS Unexpected iu_data_sz= Probable Cause Recommended Action Severity Indicates that MS received IU data of unexpected size. The IU payload and the IU size might be inconsistent with each other or with the command that is currently being processed. Wait a few minutes and try the operation again. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while initializing Fabric OS Message Reference Publication Number: 53-1000242-01 44-3