HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 448

58 SEC-1302 SEC-1302 Message , [SEC-1302], ,, INFO, , This switch does not have all the required PKI objects correctly installed. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. INFO SEC-1303 Message , [SEC-1303], ,, INFO, , This software version does not support security. Probable Cause Recommended Action Severity Indicates that the currently installed software version does not support the Brocade Secure Fabric OS feature. Run the firmwareDownload command to update the firmware to the latest version for your specific switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature. INFO SEC-1304 Message , [SEC-1304], ,, INFO, , This switch has no security license. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. INFO 58-54 Fabric OS Message Reference Publication Number: 53-1000242-01