HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 174

18 FCR-1018 FCR-1018 Message , [FCR-1018], ,, ERROR, , FC router proxy device entries exhausted on port . Probable Cause Recommended Action Severity Indicates that the number of proxy devices is greater than allowed by the port resource. Remove excess LSAN zones or devices until the number of proxy devices exported is within the range allowed by the port resource. Use the fcrResourceShow command to view resources including LSAN zone resources, LSAN device resources, and proxy device port resources. Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove, zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices can be removed by zoning operations or by bringing physical devices offline. For example, disabling the port that a device is attached to, and then disconnecting the cable or disabling the device. ERROR FCR-1019 Message , [FCR-1019], ,, ERROR, , EX or VEX port entries exhausted at port . Probable Cause Recommended Action Severity Indicates that the number of EX or VEX port entries being created is greater than allowed by the port resource. Disable EX or VEX ports until the number of ports is within the range allowed by the port resource. The EX or VEX port limit is displayed using the fcrRouteShow command. Use the portDisable command to disable EX ports. ERROR FCR-1020 Message , [FCR-1020], ,, WARNING, , Local LSAN zone entries for FC router exhausted; max limit: . Probable Indicates that the number of LSAN zones created within a MetaSAN is greater than the local LSAN Cause zone database limitations. 18-6 Fabric OS Message Reference Publication Number: 53-1000242-01