HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 300

28 HIL-1108 HIL-1108 Message , [HIL-1108], , FFDC, CRITICAL, , Switch faulted, () below threshold. System preparing for reset. Probable Cause Recommended Action Severity Indicates that the switch voltage is below threshold. This message is specific to nonbladed switches and is not applicable to the SilkWorm 12000, 24000, or 48000. For the SilkWorm 200E, 3250 and 3850, the entire switch must be replaced, because these switches do not have FRUs. For the SilkWorm 3900, replace the motherboard FRU. For the SilkWorm 4100, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. CRITICAL HIL-1201 Message , [HIL-1201], ,, WARNING, , Blower , speed ( RPM) above threshold. Probable Cause Recommended Action Severity Indicates that the fan speed (in RPM) has risen above the maximum threshold. A high speed does not necessarily mean that the fan is faulty. Run the tempShow command to verify that the switch temperatures are within operational range. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan continues to generate this message, replace the fan FRU. WARNING 28-4 Fabric OS Message Reference Publication Number: 53-1000242-01