HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 188

18 FCR-1065 FCR-1065 Message , [FCR-1065], ,, ERROR, , Fabric on port was assigned two different fabric IDs. Probable Cause Recommended Action Severity Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID assignment. Change the port fabric ID to same value as the other ports connected to the edge fabric using the portCfgExport or portCfgVexport commands. ERROR FCR-1066 Message , [FCR-1066], ,, ERROR, , Fabric on port has same fabric ID as another fabric. Probable Cause Recommended Action Severity Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same fabric ID as the fabric connected to this port. If the fabric split, then merge the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portcfgexport or portcfgvexport commands. ERROR FCR-1067 Message , [FCR-1067], ,, WARNING, , Zone configurations, total LSAN zones and aliases, exceeded on port by entries; max entries: . Probable Cause Recommended Action Severity Indicates that the total number of zone configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active and configured information that is part of the zoning database in the edge fabric. Non-LSAN zones are not counted in the limit. Limit the LSAN zoning related zone configuration in the edge fabric connected to this port. WARNING 18-20 Fabric OS Message Reference Publication Number: 53-1000242-01