HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 401

SEC-1032 58 Probable Cause Recommended Action Severity Indicates that the security database size is not supported by the standby CP. Reduce the security database size by reducing the number of entries within each policy. WARNING SEC-1032 Message , [SEC-1032], ,, ERROR, , Empty FCS list is not allowed. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1033 Message , [SEC-1033], ,, ERROR, , Invalid character used in member parameter to add switch to SCC policy; command terminated. Probable Cause Recommended Action Severity Indicates that the member parameter in the secPolicyAdd command is invalid (such as the asterisk symbol). Only valid switch identifiers, that is WWN, domain ID or switch name are supported for the member parameter. The asterisk symbol can be used to add all switches only with the secPolicyCreate command. Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the SCC policy. Refer to the Fabric OS Command Reference for more information on the secPolicyAdd and secPolicyCreate commands. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 58-7