HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 423

SEC-1108 58 SEC-1108 Message , [SEC-1108], ,, ERROR, , Fail to reset stamp on all switches. Probable Cause Recommended Action Severity Indicates that a version reset operation failed either because the switch could not get all the required resources to perform the operation or because it failed to send the message to all switches in the fabric. Verify that the security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. ERROR SEC-1110 Message , [SEC-1110], ,, ERROR, , FCS list must be the first entry in the [Defined Security policies] section. Fail to download defined database. Probable Cause Recommended Action Severity Indicates that a security policy download is attempted with a defined policy that does not have the FCS policy as the first policy. The FCS policy is required to be the first policy in the defined security database. Download a correct configuration with the FCS policy as the first policy in the defined security database. ERROR SEC-1111 Message , [SEC-1111], ,, ERROR, , New defined FCS list must have at least one member in common with current active FCS list. Fail to download defined database. Probable Cause Recommended Action Severity Indicates that the defined and active FCS policy list failed to have at least one member in common. A new FCS policy list must have at least one member in common with the previous FCS policy. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 58-29