HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 125

EM-1011 9 Severity CRITICAL EM-1011 Message , [EM-1011], , FFDC, CRITICAL, , Received unexpected power down for , but cannot determine if it has power Probable Indicates that the environmental monitor (EM) received an unexpected power-down notification from Cause the FRU specified; however, after four seconds it cannot be determined if it has powered down or not. Recommended Try reseating the blade. If this fails to correct the error, replace the blade. Action Severity CRITICAL EM-1012 Message , [EM-1012], , FFDC, CRITICAL, , failed state transition, FRU faulted Probable Cause Recommended Action Severity Indicates that a switch blade or nonbladed switch failed to transition from one state to another. It is faulted. The specific failed target state is displayed in the message. There are serious internal Fabric OS configuration or hardware problems on the switch. On SilkWorm 24000 and 48000, try reseating the indicated FRU. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. CRITICAL EM-1013 Message , [EM-1013], ,, ERROR, , Failed to update FRU information for Probable Indicates that the environmental monitor was unable to update the time alive or OEM data in the Cause memory on a FRU. Fabric OS Message Reference 9-5 Publication Number: 53-1000242-01