HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 191

FICU System Messages Chapter 19 FICU-1001 Message , [FICU-1001], ,, ERROR, , : config failed rc = Probable Cause Recommended Action Severity Indicates that one of the configuration management functions failed. The key variable is part of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Execute an haFailover on the switch if it has redundant CPs or reboot the switch. Run the saveCore command to check if your flash is full. If the flash is full, run the saveCore command to clear the core files. Refer to the Fabric OS Command Reference for more information on these commands. ERROR FICU-1002 Message , [FICU-1002], ,, ERROR, , Failed to get RNID from Management Server Domain= rc= Probable Cause Recommended Action Severity Indicates that the FICON-CUP daemon failed to get switch RNID from the management server due to a Fabric OS problem. The domain variable displays the domain ID of the target switch for this RNID. The error variable is an internal error number. If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on this command. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 19-1