HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 301

HIL-1202 28 HIL-1202 Message , [HIL-1202], ,, ERROR, , Blower faulted, speed ( RPM) below threshold. Probable Cause Recommended Action Severity Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. Replace the fan FRU. ERROR HIL-1203 Message , [HIL-1203], ,, ERROR, , Fan faulted, speed ( RPM) above threshold. Probable Cause Recommended Action Severity Indicates that the specified fan speed (in RPM) has risen above the maximum threshold. A high speed does not necessarily mean that the fan is faulty. Run the tempShow command to verify that the switch temperatures are within operational range. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan continues to generate this message, replace the fan FRU. ERROR HIL-1204 Message , [HIL-1204], ,, ERROR, , Fan faulted, speed ( RPM) below threshold. Probable Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. This message Cause is specific to nonbladed switches and is not applicable to the SilkWorm 12000, 24000, or 48000. Fabric OS Message Reference Publication Number: 53-1000242-01 28-5