HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 472

63 SYSC-1003 SYSC-1003 Message , [SYSC-1003], , FFDC, CRITICAL, , Chassis config option is not supported by CP Blade with ID . Change the chassis configuration Probable Cause Recommended Action Severity Indicates that on system startup, the option configuration file corresponding to the chassisConfig option read could not be found. This indicates that option is not supported on this platform running this version of the firmware. It could also indicate that the current option number could not be read from the chassis option storage device (the WWN card). This message occurs only on the SilkWorm 24000 and 48000. Run the chassisConfig command to change to one that is valid on this platform running this firmware. Note that the chassisConfig option 1 should be valid for all platforms running any valid firmware. CRITICAL SYSC-1004 Message , [SYSC-1004], ,, INFO, , Daemon restart successful Probable Indicates that a terminated daemon is restarted by system automatically. Cause Recommended Use the supportSave command to gather troubleshoot data. No further action is required. Action Severity INFO SYSC-1005 Message , [SYSC-1005], ,, WARNING, , Daemon is not restarted (Reason: ) Probable Indicates that a terminated daemon is not restarted, either due to restart limit is reached or restart action Cause fails 63-2 Fabric OS Message Reference Publication Number: 53-1000242-01