HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 417

SEC-1089 58 SEC-1089 Message , [SEC-1089], ,, ERROR, , Policy name was not found. Probable Cause Recommended Action Severity Indicates that the security policy name in the secPolicyAdd command does not exist. Create the appropriate security policy first, then use its name in the secPolicyAdd command to add new members. ERROR SEC-1090 Message , [SEC-1090], ,, ERROR, , SCC list contains FCS member. Please remove member from the FCS policy first. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1091 Message , [SEC-1091], ,, ERROR, , No policy to remove. Probable Cause Recommended Action Severity Indicates that the specified policy member does not exist or the policy itself does not exist. Verify that the security policy name or member ID is correct. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 58-23