HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 213

FW-1038 25 Recommended Action Severity Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly, replace the SFP. INFO FW-1038 Message , [FW-1038], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the receive power value of the SFP has fallen below the low boundary. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Verify that your optical components are clean and function properly. Replace deteriorating cables or SFPs. Check for damage from heat or age. WARNING FW-1039 Message , [FW-1039], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the receive power value of the SFP has risen above the high boundary. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Replace the SFP before it deteriorates. WARNING FW-1040 Message , [FW-1040], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Fabric OS Message Reference Publication Number: 53-1000242-01 25-7