HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 101

switch:admin> chassisconfig Current Option: 1 All Supported Options (With Blade ID 5 on slots 5-6 Option 1: One 128-port switch (Blade ID 4, 17 on slots 1-4, 7-10, Blade ID 5, 16 on slots 5-6) Option 2: Two 64-port switches (Blade ID 4 on slots 1-4, 7-10, Blade ID 5 on slots 5-6) Option 3: Two 64-port switches (Blade ID 4 on slots 1-4, ID 2 on slots 7-10, Blade ID 5 on slots 5-6) Option 4: Two 64-port switches (Blade ID 2 on slots 1-4, ID 4 on slots 7-10, Blade ID 5 on slots 5-6) Please use slotshow to see the Blade IDs of the SW and CP blades and check with customer support on the list of all available SW and CP Blade IDs and their marketing names. switch:admin> chassisconfig 2 This will reboot all the CPs and the configuration data will be restored to factory defaults if moved between single and multiple domains. This includes, but are not limited to, port swap, routing, zoning, performance monitoring, port config, fabric watch, management server, time server, snmp, security, fabric and other FabOs configuration parameters. Traffic will be disrupted and both the CPs comes up and will vary in the number of switches and the Blade IDs they recognize based on the configuration selected. Some configuration values are applicable to both single-domain and multiple-domain switches, and are therefore not modified. (Examples: licenses, IP addresses, host and switch names, SSL certificates, PKI certificates.) Please read the man page for further information. (continued on next page) Fabric OS 5.x command reference guide 101