HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 491

portLogShow Displays the port log. Synopsis portlogshow [count, saved, portid] Availability all users Description Use this command to display the port log, page by page. The portLogShow command displays the same information as portLogDump, but it enables you to press Enter after each page of output. Port logs are circular log files in the switch firmware, which can save up to 8,192 entries. See portLogConfigShow to display the current port log size. Once the log is full, the newest log entries delete the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device-to-device, and control information. If the port log is disabled, the following message displays as the first line. See portLogClear command for more information. WARNING: port log is disabled The following information displays for each log entry: Time Task Event Displays the event date and time in milliseconds. The clock resolution is 16 milliseconds. Displays the name of the internal switch procedure that logged the event, interrupt if the event was logged in interrupt context, or unknown if the task no longer exists. Displays the task event that generated log entry. Possible events include: start A switch start or re-start event disable A port is disabled enable A port is enabled ioctl A port I/O control is executed Tx A frame is transmitted (class is indicated) Rx A frame is received (class is indicated) scn A state change notification is posted pstate A port changes physical state reject A received frame is rejected busy A received frame is busied ctin A CT based request is received ctout A CT based response is transmitted errlog A message is added to the error log loopscn A loop state change notification is posted create A task is created debug A debug message nbrfsm Neighbor state transition Fabric OS 5.x command reference guide 491