HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 414

perfClearFilterMonitor Clears statistics counters of a filter-based performance monitors. Synopsis perfclearfiltermonitor [slotnumber/]portnumber [monitorId] Availability admin NOTE: This command requires a Performance Monitor license. This command is deprecated; use perfMonitorClear instead. Description Use this command to clear statistics counters for all filter-based performance monitors on a port, or a filter-based monitor associated with a specific monitorId. Issuing portStatsClear on a port also results in all filter-based monitors clearing. Operands This command has the following operands: slotnumber portnumber monitorId For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify the monitor number to clear. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are cleared. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To clear statistics counters for a filter-based monitor: switch:admin> perfclearfiltermonitor 1/2 4 Filter-based monitor number 4 counters are cleared switch:admin> perfclearfiltermonitor 1/2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y , no, n): [no] y 414 Fabric OS commands