HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 285
haDump
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
haDump Displays information about the status of the High Availability feature in the switch. Synopsis hadump Availability all users Description Use this command to display information about the status of the High Availability feature in the switch. This command displays the following information: • Local CP state (slot number and CP ID) • Remote CP state (slot number and CP ID) • High Availability enabled/disabled • Heartbeat up/down • Health of standby CP: Healthy Failed Unknown The standby CP is running and the background health diagnostic has not detected any errors. The standby CP is running, but the background health diagnostic has discovered a problem. Failover is disabled until the standby CP is repaired. The information of the failing device in the standby CP is displayed. The standby CP healthy state is unknown due to not existing, heartbeat is down, or healthy monitor detects a configuration file error. • HA synchronization status: HA State Synchronized HA State Not In Sync The system is currently fully synchronized. If a failover became necessary, it would be nondisruptive. The system is unable to synchronize the two CPs, due to a faulty standby CP or another system error. If a failover becomes necessary at this time, the standby CP reboots, causing a disruptive failover. • IP and Fibre Channel addresses configured for the switch. • Additional internal HA state information, subject to change. Operands none Fabric OS 5.x command reference guide 285
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/285.png)