HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 225
ficoncupset
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
ficoncupset Sets FICON-CUP parameters for a switch. Synopsis ficoncupset fmsmode enable | disable ficoncupset modereg bitname 0 | 1 Availability admin Description Use this command to set FICON-CUP (Control Unit Port) parameters for a switch. All the parameters described below can be set while the switch is online. Changes to parameters are effective immediately. A reboot is not required for the changes to take effect. Operands The following operands are supported: fmsmode modereg Enable or disable the FICON Management Server (FMS) mode for the switch. When parameter is fmsmode, argument is either enable or disable. Set a bit in the FICON-CUP mode register. When parameter is modereg, one of the following bitname operands should be specified, followed by 0 or 1: POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited Examples To enable FMS mode for the switch: switch:admin> ficoncupset fmsmode enable fmsmode for the switch is now Enabled To set ASM bit in the mode register for the switch: switch:admin> ficoncupset modereg ASM 1 Active=Saved Mode bit is set to 1 See Also ficoncupshow Fabric OS 5.x command reference guide 225