HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 617

setEsdMode Enables or disables ESD mode. Synopsis setesdmode [mode | -show] Availability admin Description Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in that mode until the next execution of setEsdMode. The mode becomes active as soon as this command is executed. It does not require a reboot to take effect. ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact behavior varies but most commonly consists of disabling the ports defined when spinSilk or other functional tests are run for ESD or EMI testing purposes. Operands This command has the following operands: mode -show Specify 1 to enable ESD mode, 0 to disable ESD mode. This operand is optional. Specify this operand to display the current mode setting. This operand is optional. If no operand is specified, the current value displays. Examples To display the ESD mode: switch:admin> setesdmode -show Esd Mode is 0 (Disabled). See also spinSilk Fabric OS 5.x command reference guide 617