HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 151

diagPost Sets or displays diagnostic POST configuration. Synopsis diagpost [mode | -show] Availability admin Description Use this command to enable or disable POST testing. The mode is saved in flash memory (and stays in that mode) until the next execution of diagPost. The mode becomes active as soon as this command is executed; it does not require a reboot to take effect. POST mode modifies the behavior of the diagnostics daemon program to inhibit testing of switch blades when the system is first powered on or a new blade is added. NOTE: To enable or disable diagnostic POST, the recommended method is to use diagEnablePost and diagDisablePost. Operands This command has the following optional operands: mode -show Specify 1 to enable, 0 to disable POST test. Specify this operand to display the current mode. If no operand is specified, the current value is displayed. Examples To enable and then disable the POST test: switch:admin> diagpost Diagnostic POST is currently disabled. switch:admin> diagpost 1 Config update Succeeded Diagnostic POST is now enabled. See also diagDisablePost diagEnablePost Fabric OS 5.x command reference guide 151