HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 88
cfgRemove
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
cfgRemove Removes a member from a zone configuration. Synopsis cfgremove "cfgName", "member [; member ...]" Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to remove one or more members from an existing zone configuration. If all members are removed, the zone configuration is deleted. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become in effect, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: cfgName member Specify a name for the zone configuration, in quotation marks. Specify a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To remove a zone from a configuration: switch:admin> cfgremove "Test_cfg", "redzone" See also cfgAdd cfgClear cfgCreate 88 Fabric OS commands