HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 537

qloopAdd Adds a member to a QuickLoop. Synopsis qloopadd "qloopname", "member;member" Availability admin NOTE: This command requires HP Advanced Zoning license, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to add one or more members to an existing QuickLoop. When a configuration is enabled, all QuickLoops defined in the configuration must resolve to one or two switch worldwide names. Zone alias names entered as members of this QuickLoop must be defined with WWNs. Zone alias names that are defined by domain and port number, or AL_PA are not accepted as members of the QuickLoop. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric OS 5.x. Operands The following operands are required: qloopname member Specify the name of the QuickLoop, in quotation marks. Specify a list of QuickLoop members, in quotation marks, separated by semicolons. Include one or more of the following: • world wide names • Zone alias names Examples To add an alias for a second WWN to "qlp1": switch:admin> qloopAdd "qlp1", "wwn2" See also qloopCreate qloopDelete qloopRemove qloopShow Fabric OS 5.x command reference guide 537