HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 493

errlog loopscn ctin Argument 0 is divided into two 16-bit fields: [A] A bit map indicating whether subsequent args are valid (0001 means argument 1 is valid, 0003 means arguments 1 and 2 are valid) Argument 1 is the first word of the CT payload, if applicable (as specified in [A]) Argument 2 is the second word of the CT payload, if applicable (as specified in [A]). [B] The CT-based service command code ctout Argument 0 is also divided into two 16-bit fields: [A] A bit map indicating whether subsequent args are valid (0001 means argument 1 is valid, 0003 means arguments 1 and 2 are valid). [B] The CT command code indicating whether an accept (8002) or a reject (8001). If [B] is an accept, argument 1 and 2 represents the first and second words of the CT payload, if applicable (as specified in [A]). If [B] is a reject, argument 1 contains the CT reject reason and explanation code. Error type (see errModuleShow) The meaning further depends on each loop state: OLP Offline reason code, usually zero LIP Reason code for LIPs initiated by FL_Port, if the code value is 800x (x = [1,0xc], see below), or the lower two bytes of the LIP received, if the code value is other than 800x LIM Usually zero BMP Memory address for the loop bitmap OLD Usually zero TMO Encoded value of the state when loop init timed out This value is usually equal to the first word of a loop init frame payload. Other possible values include: 2 LIP (req. INITIALIZING) timeout 94F0F0 ARB(F0) timeout 40 CLS timeout Codes used in various fields are as follows: state pstate 1 Online 2 Offline 3 Testing 4 Faulty 5 E_Port 6 F_Port 7 Segmented AC Active State LR1 Link Reset: LR Transmit State LR2 Link Reset: LR Receive State LR3 Link Reset: LRR Receive State Fabric OS 5.x command reference guide 493