HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 652

Operands This command has the following operands: -nmegs count Specify in millions the number of frames to send. The test will progress until the specified number of frames has been transmitted on each port. The default value is 10 million frames. -ports itemlist -setfail mode -domain value This command only approximately counts the frames and the actual number of frames sent will be slightly larger, particularly at 2 Gb/s link speeds. Specify a list of user ports to test. By default, all of the ISL ports in the current switch will be tested. See itemList help pages for further details. Instruct spinFab how to mark failed ports. If set to 1, it will mark failing ports as FAILED. If set to 0, it will not mark failed ports as FAILED. It is to minimize the impact on live fabrics. This test normally logs errors but does not set the port status to FAILED. This parameter is provided to force the failing ports to be marked as FAILED in the same manner as other diagnostics. In test or qualification environments without live traffic, this might be useful with large values of -nmegs count. This mode is disabled by default. Specify a remote domain to which the switch is connected. The default is to automatically determine the remote domain number. This might not work properly in certain conditions. Examples To test cascading ISL links: switch:admin> spinfab -ports 1/0 - 1/2 spinfab running... spinfab: Completed 11 megs, status: passed. port 0 test status: 0x00000000 -- passed. port 1 test status: 0x00000000 -- passed. port 2 test status: 0x00000000 -- passed. Test Complete: "spinfab" Pass 10 of 10 Duration 0 hr, 0 min & 41 sec (0:0:41:877). passed. Diagnostics When it detects failures, the test might report one or more of the following error messages: DATA ERR_STAT ERR_STATS ERR_STATS_2LONG ERR_STATS_BADEOF ERR_STATS_BADOS ERR_STATS_C3DISC ERR_STATS_CRC ERR_STATS_ENCIN ERR_STATS_ENCOUT ERR_STATS_TRUNC 652 Fabric OS commands