HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 778

Table 28 switchAdmin commands (continued) Command Description chassisShow Displays all field replaceable units (FRUs). chipRegShow Displays the port registers for a given chip number. cmemRetentionTest Tests the data retention of the central memory SRAMs. cmiTest Verifies the control message interface (CMI) bus between ASICs. configShow Displays system configuration settings. configDownload Downloads a switch configuration file from a host file, omitting zoning and security configurations. configUpload Uploads the switch configuration file to a host file. configure Modifies system configuration parameters. dataTypeShow Displays sample data stream types used in some diagnostic commands. date Displays or sets the switch date and time. dbgShow Displays current values of debug and verbosity levels of the specified module. diagHelp Displays diagnostic command information. dlsReset Disables the dynamic load sharing (DLS) option. dlsSet Enables the dynamic load sharing (DLS) option. dlsShow Display the setting of the dynamic load sharing (DLS) option. dnsConfig Sets or displays domain name service (DNS) parameters. enclosureShow Displays attributes of the switch enclosure. errClear Clears all error log messages for all switch instances on this control processor (CP). errDelimiterSet Sets the error log start and end delimiter for messages sent to the console and syslog. errDump Displays the error log, without pagination. errModuleShow Displays all the defined error log modules. errShow Displays the error log messages, with pagination. exit Logs out from a shell session. fabPortShow Displays fabric port information. fabRetryShow Displays the retry count of the fabric commands. fabricLog Displays or manipulates the fabric log. 778 MUA-based roles