HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 432

perfShowFilterMonitor Displays filter-based performance monitor information for a port. Synopsis perfshowfiltermonitor [slotnumber/]portnumber [interval] Availability all users NOTE: This command requires a Performance Monitor license. This command is deprecated; use perfMonitorShow instead. Description Use this command to display all the filter-based monitors defined on the specified port and the traffic count values. See perfMonitorShow for details regarding this command's output. Operands This command has the following operands: slotnumber portnumber interval For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify an interval, in seconds (5 or more). This operand is optional. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To display filter monitor traffic on a port at an interval of every 6 seconds: switch:admin> perfshowfiltermonitor 2/5 6 perfshowfiltermonitor 21, 6 0 1 2 3 4 5 6 #Frames #CMDs #CMDs #Frames #Frames #CMDs #CMDs 0 0 0 0 0 0 0 26k 187 681 682 682 494 187 26k 177 711 710 710 534 176 26k 184 734 734 734 550 184 26k 182 649 649 649 467 182 26k 188 754 755 755 567 184 26k 183 716 716 717 534 183 26k 167 657 656 655 488 167 26k 179 749 749 749 570 179 (continued on next page) 432 Fabric OS commands