HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 614

secVersionReset Resets the security version stamp to 0. Synopsis secversionreset Availability admin Description Use this command to reset the security version stamp of all switches in a fabric to 0, so that it can be joined to another secure fabric. When merging two or more secure fabrics: 1. Determine which secure fabric will become the FCS_POLICY controller fabric: the dominant fabric to which all other secure fabrics will be merged. 2. Use the secPolicyAdd, secPolicyRemove, and secPolicyActivate commands to modify the FCS_POLICY of the merging fabrics to match the FCS_POLICY of the controller fabric. All secure fabrics to be merged must have identical FCS_POLICY lists. The FCS policies of merged fabrics must match exactly; they must contain the same FCS members and in the same order, or the merge will fail. 3. Reset the version stamp using the secVersionReset command on each secure fabric to be merged into the controller fabric. The controller fabric does not require a version reset. 4. Cascade the fabrics together. When the secure fabrics merge, the primary FCS switch in the controller fabric propagates its security policies across the newly formed fabric. NOTE: This command must be issued from a sectelnet or SSH session and can be issued only from the primary FCS switch, a non-FCS when there is no FCS switch in the fabric, or from a disabled switch. Operands none Example To reset the version stamp to 0: switch:admin> secversionreset About to reset version stamp to 0. Are you sure (yes, y, no, n):[no] y done. Security Policy Version Stamp has been set to 0. See also secFabricShow secModeDisable secModeShow secTransAbort 614 Fabric OS commands