HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 207

faZoneRemove Removes members from a Fabric Assist zone. Synopsis fazoneremove "fazoneName", "member; member ..." Availability admin Description Use this command to remove one or more members from an existing Fabric Assist zone. Each deleted member must be found by an exact string match. Order is important when removing multiple members of a Fabric Assist zone. For example, if a Fabric Assist zone contains "array2; array3; array4", removing "array4; array3" fails but removing "array3; array4" succeeds. If issuing this command results in all members being removed, the Fabric Assist zone is deleted. This command does not change the defined configuration (which you can view using the cfgShow command). For the change to become effective, an appropriate Fabric Assist zone configuration must be enabled using the cfgEnable command. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: fazoneName member Specify a name for the Fabric Assist zone, in quotation marks. Specify a member or list of members to remove from a Fabric Assist zone. The list must be enclosed in quotation marks, members separated by semicolons. A member can be specified by one or more of the following methods: • Enter a fabric domain and area number pair (for example, "1,2"). View the area numbers for ports using the switchShow command. • WWNs (for example, "10:49:00:00:00:20:3f:2e"). See faZoneCreate for more details on the use of WWNs in Fabric Assist zones. • Fabric Assist zone alias names. • Exactly one Fabric Assist host member (for example, "H{1,2}"). Examples To remove "array2" from "Blue_fazone": switch:admin> fazoneremove "Blue_fazone", "array2" Fabric OS 5.x command reference guide 207