HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 572

If the fabric is in secure mode and no FCS switches are present in the fabric, the command can be issued on any switch. This is used to recover a secure fabric that has no FCS switch. Only the --fcs option can be used in this case. NOTE: Using Fabric OS CLI or Web Tools, ensure that all users are logged off the fabric before enabling secure mode; otherwise, users on non-FCS switches lose their telnet sessions. HP recommends that a maximum of 80 WWNs be specified in the FCS policy using the command. To add more WWNs use the secPolicyAdd command. Operands This command has the following operands: list_of_switches Specify a list of switches for the FCS policy. The list of switches must be enclosed in quotation marks, and each member switch must be separated from the others by semicolons. The members can be specified using domain, WWN, or switch name format, as follows: "5; 10:00:00:60:69:00:00:20; star1" If a member is specified by domain or switch name, the switch must be in the fabric or the command fails. -fcs list_of_switches This operand is optional. If no operand is specified, the session becomes interactive and you are prompted to enter FCS member values. Specify a list of switches for the FCS policy. Specifying "*" defaults this to all the switches currently present in the fabric. If a member is specified by domain or switch name, the switch must be in the fabric or the command fails. --currentpwd --lockdown[=scc |=dcc] If the list of FCS switches is not specified, the session becomes interactive and the user is prompted to enter FCS members. Use the current passwords of the switch the command is run on (the primary FCS switch) for root, factory, admin and user accounts. Non-FCS admin account password is set the same as FCS admin account password. The command does not prompt for new passwords. Only sessions whose account password has changed are logged out. This option can be used only on a fabric with secure mode disabled and only when the command is run on the switch specified as the primary FCS switch. Create SCC and DCC policies to lockdown the fabric. SCC policy is populated with all the switches present in the fabric when the command is executed. DCC policies are populated with the devices present in the fabric when the command is executed, locking down devices on a per port basis. Ports with no devices attached to them also are locked down with an empty DCC policy so no device can be connected to them, preserving the fabric as is. The lockdown operand creates both SCC and DCC policies. With the optional argument of --lockdown=scc or --lockdown=dcc, only the specified policy is created. This operand can be used only on a fabric with secure mode disabled and only when the command is run on the switch specified as the primary FCS switch. 572 Fabric OS commands