HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 382
nsZoneMember
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
nsZoneMember Displays the information of all the online devices zoned with the given device. Synopsis nszonemember -a | -u | pid | wwn Availability all users Description Use this command to display information about all the online devices zoned with the given device. Issuing this command without operands displays all online devices zoned with the given device. Each line of output displays: Type Pid COS PortName NodeName Permanent Port Name DeviceType U for unknown, N for N_Port, NL for NL_Port The 24-bit Fibre Channel address A list of classes of service supported by the device The device's port world wide name (WWN) The device's node WWN Physical N_Port or NL_Port WWN The device's type There might be additional lines if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA • port and node symbolic name (local device only) • fabric port name • hard address and/or port IP address Operands This command has the following operands: -a -u pid | wwn Displays each local device's online zoned device data, including the PID and zone alias. Displays all the unzoned devices in the entire fabric. The device data displayed includes the device PID and zone alias. Specifies the port ID or WWN, respectively, whose zoned devices are to be viewed. This operand is required. 382 Fabric OS commands
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/382.png)