HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 377

nsShow Displays local Name Server (NS) information. Synopsis nsshow [-r -t] Availability all users Description Use this command to display local NS information about devices connected to this switch. The following message is displayed if there is no information in this switch: There is no entry in the Local Name Server The nsAllShow command displays information from all switches. Each line of output displays: Type PID COS PortName NodeName TTL SCR Device type Permanent Port Name U for unknown, N for N_Port, NL for NL_Port. 24-bit Fibre Channel address. List of classes of service supported by device. Device port world wide name (WWN). Device node WWN. Time-to-live, in seconds, for cached entries or NA (not applicable) if the entry is local. This displays if the -r option is given. State change registration of the device. This displays if the -r option is given. Device type if -t is given. Physical N_Port or NL_Port WWN. There might be additional lines if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4s supported • IP address • IPA • Port and node symbolic names • Fabric Port Name. This is the WWN of the port on the switch to which the device is physically connected. • Hard address and/or port IP address Fabric OS 5.x command reference guide 377