HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 243
Diagnostics, Package specified in
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
switch:admin> firmwareDownload 192.168.166.30,johndoe,/pub/dist/release.plist,12345 This command will upgrade both CPs in the switch. If you want to upgrade a single CP only, please use -s option. You can run firmwareDownloadStatus to get the status of this command. This command will cause the active CP to reset and will require that existing telnet, secure telnet or SSH sessions be restarted. Do you want to continue [Y]: FirmwareDownload has started in Standby CP. It may take up to 10 minutes. And you will the following on Standby CP: Start to install packages...... dir terminfo termcap glibc ...... sin Write kernel image into flash. ........ Verification SUCCEEDED Firmwaredownload completes successfully. Diagnostics The following can cause the download to fail: • Host is not known to the switch • Host cannot be reached by the switch • User does not have permission on host • The pfile does not exist on host • The pfile is not in the right format • Package specified in the pfile does not exist • The FTP server is not running on host • Running firmwareDownload during POST • A loss of power to the switch Fabric OS 5.x command reference guide 243
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/243.png)