HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 533
powerOffListShow
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 533 highlights
powerOffListShow Displays slot power-off list order. Synopsis powerofflistshow Availability all users Description Use this command to display the order in which the physical slots will be powered off. The system-available power is compared to the system demand power to determine if there is enough power to operate. If there is less power available than the demand, then the power-off list is processed until there is enough power for the system to operate. If the system abruptly goes from a state in which there is enough power to run all inserted and powered on FRUs to a state in which there is not enough power to run everything (for instance, when a third power supply is removed from the chassis so there is suddenly only one power supply is available to power a fully loaded system), no processing of the power-off list can be done. This is because the lack of power causes the CP boards' processors to cease execution of the firmware. In this situation, all operation of the system terminates immediately. However, if the system is running on two power supplies (this is not recommended) and one goes into a predicted fail state (in which the power supply is still supplying power), the power-off list is processed as described. The format of the display varies, depending on the switch model and the number of slots present. Operands none Examples To display the slot power-off list order: switch:admin> powerOffListShow Slot 10 will be powered off 1st Slot 9 will be powered off 2nd Slot 8 will be powered off 3rd Slot 7 will be powered off 4th Slot 6 will be powered off 5th Slot 5 will be powered off 6th Slot 4 will be powered off 7th Slot 3 will be powered off 8th Slot 2 will be powered off 9th Slot 1 will be powered off 10th Fabric OS 5.x command reference guide 533