HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 417

perfDelEEMonitor Deletes one or all end-to-end performance monitors from a port. Synopsis perfdeleemonitor [slotnumber/]portnumber [monitorId] Availability admin NOTE: This command requires a Performance Monitor license. Description Use this command to delete an end-to-end performance monitor from a port, or all such monitors associated with a port. Operands This command has the following operands: slotnumber portnumber monitorId For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specify the monitor number to delete. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are deleted. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To delete an end-to-end monitor on a port, or all such monitors: switch:admin> perfdeleemonitor 7/2 5 End-to-End monitor number 5 deleted switch:admin> perfdeleemonitor 7/2 This will remove ALL EE monitors on port 2, continue? (yes, y, no, n): [no] y See also perfAddEEMonitor perfShowEEMonitor Fabric OS 5.x command reference guide 417