HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 24
Examples, See also, Move the specified server in the existing RADIUS configuration
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
--add server [-p port] [-s secret] [-t timeout] [-a chap | pap] Add the specified server to the end of the RADIUS configuration list, with the specified port number, shared secret, timeout, and if PAP or CHAP is to be used as authentication protocol. server must be different from the servers in the existing configuration. --remove server Remove the specified server from the RADIUS configuration list.server must match a server in the existing configuration. To remove the last server, you must disable the RADIUS configuration first. --change server [-p port] [-s secret] [-t timeout] [-a chap | pap] Change parameters for the specified server in the existing RADIUS configuration list. server must match one in the existing configuration. --move server to_position Move the specified server in the existing RADIUS configuration list from the current position to the specified new position. This rearranges the order in which the specified RADIUS server is used. --radius [on | off] Enable or disable the current RADIUS configuration for AAA services. This is used to switch the primary AAA services between RADIUS and the switch local database. To enable the RADIUS configuration, there must be at least one server existing in the configuration. --switchdb [on | off] Enable or disable the switch local database as the secondary AAA services. When enabled, if RADIUS requests a timeout for all RADIUS servers, the switch local database is used for authentication; otherwise, requests are denied. Examples To display the current RADIUS configuration: switch:admin> aaaconfig --show Position Server Port Secret Timeout(s) Auth-Protocol 1 192.168.233.48 2 192.168.233.44 3 radserver 1812 1812 1812 sharedsecret 3 sharedsecret 3 private 5 CHAP CHAP CHAP Primary AAA Service: Switch database Secondary AAA Service: None To change the configuration for server 192.168.233.48: switch:admin> aaaconfig --change 192.168.233.48 -p 3002 -s newsecret -t 1 See also none 24 Fabric OS commands