HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 785

Table 28 switchAdmin commands (continued) Command Description snmpMibCapShow Displays options for configuring SNMP MIB trap capability. supportShow Displays switch information for debugging purposes. supportShowCfgDisable Disables a group of commands under the supportShow command. supportShowCfgEnable Enables a group of commands under the supportShow command. supportShowCfgShow Displays the groups of commands enabled for display by the supportShow command. switchBeacon Sets switch beaconing mode on or off. switchCfgPersistentDisable Disables a switch persistently. switchCfgPersistentEnable Enables a switch persistently. switchCfgSpeed Configures all ports of a switch to a particular speed. switchCfgTrunk Enables or disables trunking on all the ports of a switch. switchDisable Disables the switch. switchEnable Enables the switch. switchName Displays or sets the switch name. switchShow Displays switch and port status. switchStatusPolicySet Sets the policy parameters that determine overall switch status. switchStatusShow Displays the policy parameters that determine overall switch status. switchStatusShow Displays overall switch status. switchUptime Displays the amount of time the switch has been operating. syslogdIpAdd Adds the IP address of a syslog daemon. syslogdIpRemove Removes the IP address of a syslog daemon. syslogdIpShow Displays all syslog daemon IP addresses. systemVerification Runs a suite of diagnostic tests on all switches in a fabric. tempShow Displays temperature readings. timeout Sets or displays the idle timeout value for a login session. topologyShow Displays the unicast fabric topology. traceDump Displays, initiates, or removes a trace dump. traceFtp Displays, enables, or disables the trace auto-FTP or FTPsa trace dump file to the customer FTP server. Fabric OS 5.x command reference guide 785