HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 378
affected Nx_Port., A SCSI initiator
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
Operands This command has the following operands: -r Replaces the TTL attribute output with SCR (state change registration) information in the display. This value indicates what type of RSCN a device registers to receive. Values include: SCR=0 Reserved. SCR=1 Fabric detected registration. Register to receive all RSCN requests issued by the fabric controller for events detected by the fabric. SCR=2 Nx_Port detected registration. Register to receive all RSCN requests issued for events detected by the affected Nx_Port. SCR=3 Register to receive all RSCN request issued. The RSCN request returns all effected N_Port_ID pages. -t Displays the device type. Of the two device type parts, the first part indicates the origination of the device. Currently, four originations are defined: Physical Device connected to the Nx_Port, using FLOGI to login to the switch Virtual Contrived device by the switch NPV Device connected to the Nx_Port, using FDISC to log in to the switch iSCSI Device connected to the iSCSI port The second part indicates the role of the device. Currently, four roles are defined: Unknown Device role is not detected (initiator/target) Initiator A SCSI initiator Target A SCSI target Initiator+Target Both a SCSI initiator and a SCSI target NOTE: Fabric OS 4.x or earlier does not include device type information. After a nondisruptive upgrade from those Fabric OS versions, the device type appears as "Physical Unknown(initiator/target)". 378 Fabric OS commands
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/378.png)