HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 469

portDisable Disables a port. Synopsis portdisable [slotnumber/]portnumber Availability admin Description Use this command to disable a port. If the port is connected to another switch, the fabric might reconfigure. If the port is connected to one or more devices, the devices can no longer communicate with the fabric. If the port was online before being disabled, a state transition will be indicated: RSCN, an SNMP trap, a Web pop-up window. The front-panel LED of a disabled port flashes yellow with a two-second cycle. Operands This command has the following operand: slotnumber portnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To disable a port: switch:admin> portdisable 2/4 See also portCfgPersistentDisable portCfgPersistentEnable portEnable portShow switchShow Fabric OS 5.x command reference guide 469