HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 718

traceTrig Sets, removes, or displays trace triggers. Synopsis tracetrig [-S] [-s slot] tracetrig -a [-s slot] msgid tracetrig -r [-s slot] msgid tracetrig -R [-s slot] Availability admin Description Use this command to set, remove, or display trace triggers for the specified slot on the switch. NOTE: If there is no parameter specified, this command defaults to tracetrig -S. Operands This command has the following mutually exclusive operands: -S Displays trace triggers for the specified slot. -a Sets a trace trigger for the specified slot. -r Removes a trace trigger from the specified slot. -R Removes all trace triggers from the specified slot. -This command has the following optional operand: -s slot Specifies the slot number from which a trace dump is generated. If this is not supplied, the trace dump is generated from the local slot. The -a and -r options also have the following required operand: msgid Specifies the trigger number, using the RASLog message ID. This operand is required. Examples To set a trace trigger: switch:admin> tracetrig -a NS-1001 trace trigger[NS-1001] is added To remove a trace trigger: switch:admin> tracetrig -r NS-1001 trace trigger[NS-1001] is removed 718 Fabric OS commands