HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 685

switchCfgSpeed Configures all ports of a switch to a particular speed. Synopsis switchcfgspeed speed_level Availability admin Description Use this command to configure the speed of all the ports on a switch to a particular level. The configuration is saved in flash memory and persists across switch reboots or power cycles. If any port on the switch is not capable of the specified speed setting, an error message appears for that port. The output of portShow displays the achieved speed level and portCfgShow displays the user's desired speed setting. Operands This command has the following required operand: speed_level Specify the speed of a port. Valid values are one of the following: 0 Auto-sensing mode. The port automatically configures for the highest speed. 1 1-Gb/s mode. The port is fixed at 1 Gb/s. 2 2-Gb/s mode. The port is fixed at 2 Gb/s. 4 4-Gb/s mode. The port is fixed at 4 Gb/s. Examples To set the speed level for all ports on a switch: switch:admin> switchcfgspeed 0 Committing configuration...done. See also portCfgSpeed portShow Fabric OS 5.x command reference guide 685