HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 316

ipAddrShow Display the IP address information for a switch or control processor (CP). Synopsis ipaddrshow [-cp cp_number] | [-sw sw_number] Availability all users Description Use this command to display the IP addresses configured in the system. The -cp option displays the CP IP address and the -sw option displays the switch IP addresses. For switches, the command displays the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask. For CPs, the command displays the Ethernet IP address, Ethernet subnetmask, host name, and gateway IP address. Operands This command has the following operands: -cp cp_number -sw sw_number For dual-CP systems, specify CP card number to display (0 or 1). For dual-domain systems, specify the switch number to display (0 or 1). If no operands are specified, the command displays all the IP addresses configured in the system. For nonchassis-based switches, this command ignores all operands. Examples To display the IP address for logical switch 0: switch:admin> ipaddrshow -sw 0 Ethernet IP Address: 192.168.166.147 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: 0.0.0.0 Fibre Channel Subnetmask: 0.0.0.0 See also ipAddrSet 316 Fabric OS commands