HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 541

qloopRemove Removes a member from a QuickLoop. Synopsis qloopremove "qloopName", "member;member" Availability admin NOTE: This command requires HP Advanced Zoning license, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to remove one or more members from a QuickLoop. The member list is identified through an exact string match; therefore, when removing multiple members, order is important. For example, if a QuickLoop contains "wwn3; wwn4", removing "wwn3; wwn4" succeeds, but removing "wwn4; wwn3" fails. If all members are removed, the QuickLoop is deleted. When a configuration is enabled, all QuickLoops defined in the configuration must resolve to one or two switch worldwide names. This command changes the Defined Configuration. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric OS 5.x. Operands The following operands are required: qloopName member Specify the name of the QuickLoop, in quotation marks. Specify the list of the QuickLoop members to be removed, in quotation marks, separated by semicolons. Include one or more of the following: • world wide names • Zone alias names Examples To remove member "wwn2" from "qlp1": switch:admin> qloopRemove "qlp1", "wwn2" Fabric OS 5.x command reference guide 541