HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 760

zoneObjectRename Renames a zone object. Synopsis zoneObjectRename "objectName", "newName" Availability admin NOTE: This command requires HP Advanced Zoning license, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to rename a zone object. You can use this command for all zone object types, including cfg, zone, and alias. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case sensitive; for example, Cfg_1 and cfg_1 are different zone configurations. Spaces are ignored. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. See the zoneCreate command for more information on name and member specifications. NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: objectName newName The name of the object that you want to rename. This operand is required. The new name of the object. This operand is required. Examples To create a configuration containing three zones: switch:admin> cfgShow "*" cfg: USA_cfg Red_zone; White_zone; Blue_zone switch:admin> zoneObjectRename "USA_cfg", "UK_cfg" switch:admin> cfgShow "*" cfg: UK_cfg Red_zone; White_zone; Blue_zone 760 Fabric OS commands