HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 83

cfgCreate Creates a zone configuration. Synopsis cfgcreate "cfgName", "member; member" Availability admin NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration Services and bundled with each B-series switch. Description Use this command to create a new zone configuration. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case sensitive: for example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. The zone configuration member list must have at least one member. Empty member lists are not allowed. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. See the zoneCreate command for more information on name and member specifications. NOTE: When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following required operands: cfgName member Specify a name for the zone configuration, in quotation marks. Specify a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To create a configuration containing three zones: switch:admin> cfgcreate "USA_cfg", "Red_zone; Blue_zone; Green_zone" Fabric OS 5.x command reference guide 83