HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 671

supportSave Saves support information for RASLOG, TRACE, and supportShow. Synopsis supportsave [-n] [-c] [-u user_name -p password] -h host_ip -d remote_dir Availability admin Description Use this command to save RASLOG, TRACE, and supportShow information and other support information to a remote FTP location. On a dual-CP system, only the local CP information is saved and supportShow information is not available on the active CP. If no operands are specified, this command enters interactive mode. The following output files are generated: RASLOG TRACE supportShow Zone log RCS command log NS event log chassisname-slot-YYYYMMDDHHMM-errDumpAll.ss chassisname-slot-YYYYMMDDHHMM-tracedump.dmp chassisname-slot-YYYYMMDDHHMM-supportShow chassisname-slot-YYYYMMDDHHMM-zone.ss chassisname-slot-YYYYMMDDHHMM-rcscmd.ss chassisname-slot-YYYYMMDDHHMM-ns.ss Logs are saved in the specified remote directory. Also, this command reminds you whether or not a new trace dump needs to be generated manually before you run supportSave. Operands The operands are as follows: -n Does not prompt you for confirmation. This operand is optional; if omitted, you are prompted for confirmation. -c Uses the FTP parameters saved by the command supportFtp. This operand is optional; if omitted, specify the FTP parameters through command line options or interactively. To display the current FTP parameters, run supportFtp (on a dual-CP system, run supportFtp on the active CP). NOTE: The -c operand is mutually exclusive with -u, -p, -h, and -d. -u user_name -p password -h host_ip -d remote_dir Specifies the user name for the FTP server. This operand is optional; if omitted, anonymous FTP is used. Specifies the password for the FTP server. This operand is optional; if omitted, anonymous FTP is used. Specifies the IP address for the FTP server. Specifies the remote directory for the FTP server. Fabric OS 5.x command reference guide 671