HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 642

systemGroup configuration parameters sysDescr sysLocation sysContact authTraps System description. The default value is Fibre Channel Switch. Location of the system (switch). The default value is End User Premise. Contact information for this system (switch). The default value is set as Field Support. See the definition of sysDescr, sysLocation, and sysContact in system group of MIB-II. When enabled, the authentication trap (authenticationFailure) is transmitted to a configured trap recipient in the event that the agent received a protocol message that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this means that a request contains a community string that is not known to the agent. The default value for this parameter is 0 (disabled). Operands This command supports the following operands: --show --set --default Displays the SNMP agent configuration data of the specified category. Sets the SNMP agent configuration data of the specified category. This operand displays the current settings, and then prompts you to change the values for each parameter. Sets the SNMP agent configuration data for a specified item to the default values. Generally, these default values might be available in the configuration database. Factory default settings are set if the SNMP agent configuration parameters are not available in the configuration database. --show, --set, and --default support the following: snmpv1 snmpv3 accessControl mibCapability systemGroup Selects SNMPv1-related configuration parameters. SNMPv1 parameters include the community string, trap recipient IP address, and trap severity level associated with each trap recipient IP address. Selects SNMPv3-related configuration parameters. SNMPv3 parameters include user name, authentication protocol and password, SNMPv3 trap recipients IP address, associated user index, and trap severity level. Selects access-control-related parameters. accessControl parameters include access host subnet area and access permission (read-write). Selects configuration parameters related to the SNMP agent's MIBs and trap capability parameters. mibCapability parameters include MIBs and traps supported by the SNMP agent. Selects configuration parameters related to the system group. systemGroup parameters include sysDescr, sysLocation, sysContact, and authentication failure trap. 642 Fabric OS commands