HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 712

topologyShow Displays the unicast fabric topology. Synopsis topologyshow [domain] Availability all users Description Use this command to display the fabric topology, as it appears to the local switch, including: • A list of all domains that are part of the fabric, and to each of those domains, all possible paths from the local switch. • For each path cost, the number of hops from the local switch to the destination switch and a summary of all ports are routed through that path. The display contains the following fields: Local Domain ID Domain Metric Name Path Count Hops Out Port In Ports Total Bandwidth Bandwidth Demand Flags Domain number of local switch. Domain number of destination switch. Cost of reaching destination domain. The name of the destination switch. The number of currently active paths to the destination domain. The maximum number of hops to reach destination domain. Port to which incoming frame are forwarded to reach the destination domain. Input ports that use the corresponding out port to reach the destination domain. This is the same information provided by portRouteShow and uRouteShow. The maximum bandwidth of the out port. The maximum bandwidth demand by the in ports. Always D, indicating a dynamic path. A dynamic path is discovered automatically by the FSPF path selection protocol. Operands This command has the following operand: domain Specify the destination domain for which topology information is to be displayed. This operand is optional; if omitted, this command displays the topology information of all the domains in the fabric. 712 Fabric OS commands