HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Command Reference Guide (AA - Page 721
trackChangesSet
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 721 highlights
trackChangesSet Enables or disables configuring of track-changes feature. Synopsis trackchangesset [mode][, snmptrapmode] Availability admin Description This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be enabled. Trackable changes are: • Successful login • Unsuccessful login • Logout • Config file change from task • Track changes on • Track changes off The output from the track-changes feature is dumped to the error log for the switch. Use the errDump command or the errModuleShow command to view the error log. Operands This command has the following operands: mode snmptrapmode Specify 1 to enable the track-changes feature or specify 0 to disable the feature. The default (if no operand is specified) is to disable the track-changes feature. This operand is optional. Specify 1 to enable errors to be sent to the SNMP-TRAP in addition to the errlog or specify 0 to disable the SNMP-TRAP messages. The default (if no operand is specified) is to disable SNMP-TRAP messages. This operand is optional. Examples To enable the track-changes feature: switch:admin> trackchangesset 1, 1 Committing configuration...done. switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: YES Fabric OS 5.x command reference guide 721
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-command-reference-guide-aarvhvbte-2005-b63918e/721.png)